Repair supplemental restraint system (SRS) squib wiring harness - AR54.18-P-0600A

MODEL 124, 129, 140, 163, 164, 168, 169, 170, 171, 202, 203, 204, 208, 209, 210, 211, 215, 216, 219, 220, 221, 230, 240, 245, 251, 414, 461 as of 1.4.94, 463

MODEL 126 with CODE (291) Airbag for driver and front passenger (for front passenger only if driver airbag standard) with CODE (442) Airbag in steering wheel

Fig 1: Identifying Supplemental Restraint System Squib Wiring Harness Repair Components

	Remove/install
	Risk of injury caused by performing testing or repair work on airbag or emergency tensioning retractor units.	Store airbag units with deployment side facing up; do not expose to temperatures greater than 100 °C. When working on these units, disconnect the power supply.	AS91.00-Z-0001-01A
	Risk of injury caused by performing testing or repair work on airbag or emergency tensioning retractor units.	Store airbag units with deployment side facing up; do not expose to temperatures greater than 100 °C. When working on these units, disconnect power supply and unplug the SRS test connector (X11/13).	AS91.00-Z-0001-01B
	Risk of injury to skin and eyes caused by handling hot or glowing objects.	Wear safety gloves, protective clothing and safety glasses, if necessary.	AS00.00-Z-0002-01A
	Risk of injury caused by burns to skin and eyes. Risk of poisoning caused by inhaling fumes when working with heat-shrinkable tubing.	Work in well ventilated rooms only. Wear safety glasses with side protection and protective gloves.	AS00.19-Z-0001-01A
	Assessment of airbag and belt tensioner units in accident vehicles	Model 129, 202 up to 30.6.93 Model 124, 126, 140	AH91.00-P-0006-01A
	Notes on replacement of safety-relevant and special components		AH00.19-P-1000-08A
	Assessment of airbag and belt tensioner units in accident vehicles	Model 129 as of 1.7.93, 163, 164, 168, 169, 170, 171, 202 as of 1.7.93, 203, 204, 208, 209, 210, 211, 215, 216, 219, 220, 221, 230, 240, 245, 251, 414, 461 as of 1.4.94, 463	AH91.00-P-0006-01B
	Notes on cable protection		AH00.19-P-1000-11A
1	Remove detachable body components in area to be repaired
2	Repairing wiring harness using solder connectors		AR00.19-P-0100-09A
		Wiring harness repair kit, basic	Fig 3
		New passenger vehicle wiring harness repair kit	Fig 2
		Wire stripper	Fig 5
		Reflector	Fig 4
		Adapter	Fig 6
		Welding bead catcher Heat gun, see GOTIS http://gotis.aftersales.daimlerchrysler.com	Fig 9
3.1	Protect the repair point with heat-shrinkable tube after repairing the line		AR00.19-P-0100-08A
3.2	Protect the repair point with corrugated hose after repairing the line		AR00.19-P-0100-08B
3.3	Protect the repair point with fabric tape after repairing the line		AR00.19-P-0100-08C
4	Checking wiring harness	Function check on completion of repair.	AR54.18-P-0600-01A
		Electrical connection set	Figure
		126-pin socket box	Figure
5	Install in the reverse order