Removing and installing fuse and relay box - AR54.15-P-1255EA

MODEL 202.01 /02 /12 up to 30.11.94 

Fuse and relay box 

Sedans up to 30.11.94 

Fig 1: Identifying Fuse And Relay Box Remove/Install Components (Model 202.01 /02 /12 Up To 30.11.94) - Sedans Up To 30.11.94

	Removal, installation
1	Disconnect ground cable at the battery		AR54.10-P-0003A
2	Remove cover of fuse box (1)	Examine gasket for signs of damage
3	Remove screws (2)
4	Remove cover of relay box (3)	Check gasket for damage
5	Unscrew screw (4)
6	Remove fuse boxes (F1/1, F2 and F3) and disconnect
7	Disconnect leads on fuse boxes or fuse blocks	Disconnect leads only when changing entire fuse and relay box. To avoid mix-ups bind disconnected leads for individual fuse boxes or blocks together and mark.	AR54.15-P-1255-01EA
	Connect leads to fuse boxes or fuse blocks		AR54.15-P-1255-02EA
	Fuse block assignment and lead connections		GF54.15-P-1255EB
8	Disconnect all relays	Relay holder assignment	AR54.15-P-1255-03EA
9	Remove exterior lamps failure monitoring unit	Press catch strap
10	Remove relay holder
11	Unclip connectors on bottom of relay holder or carrier
12	Remove connectors for exterior lamp failure monitoring module		AR54.15-P-1255-04EA
	Install connectors for exterior lamp failure monitoring module		AR54.15-P-1255-05EA
13	Unscrew nuts (7)
14	Remove fuse and relay box (F1)	Check gasket for damage
15	Reinstall in opposite order