Removing and installing exterior lamp switch - AR54.25-P-3250EA
MODEL 202
| Removal, installation | |||
|---|---|---|---|
| 1 | Disconnect ground cable at the battery | AR54.10-P-0003A | |
| 2 | Remove cover below instrument panel (driver's side) | AR68.10-P-1500E | |
| 3 | Pull off control knob on exterior lamp switch (50) | ||
| 4 | Take out bulb (51) | ||
| 5 | Unscrew nut (52) | ||
| 6 | Take off cover (53) | ||
| 7 | Unclip headlamp range adjuster (54) | ||
| 8 | Turn exterior lamp switch (S1) to the left and take out to the rear | ||
| 9 | Unplug electrical connection (55) | ||
| 10 | Install in the reverse order |