Remove/install combination relay - AR54.15-P-1500EA
MODEL 202 up to 31.5.97
| Remove/install | |||
|---|---|---|---|
| Hazard from contact with parts conducting high voltages. | Do not touch parts which conduct high voltages. Persons who wear electronic implants (e.g. heart pacemakers) must not carry out work on the ignition system. | AS15.10-Z-0001-01A | |
| Notes on avoiding damage to ignition system | Engine 111 with PEC fuel injection and ignition system | AH15.10-P-0002-01B | |
| Notes on avoiding damage to ignition system | Engines 104, 111 with HFM-SFI fuel injection and ignition system | AH15.10-P-0002-01C | |
| Notes on avoiding damage to ignition system | Engine 104, 111, 112, 113, 119, 120 | AH15.10-P-0002-01D | |
| Notes on avoiding damage to ignition system | Engines 103, 104, 119 with CFI continuous fuel injection system | AH15.10-P-0002-01E | |
| Notes on avoiding damage to ignition system | Engines 104, 119, 120 with LH-SFI fuel injection system | AH15.10-P-0002-01F | |
| 1 | Open hood and raise to vertical position | AR88.40-P-1000E | |
| 2 | Disconnect ground cable of battery | AR54.10-P-0003A | |
| 3 | Remove cover (1) from fuse box | ||
| 4 | Unscrew bolts (2) | ||
| 5 | Remove relay box cover (3) | ||
| 6 | Disconnect AIR relay module (K17) from plug location "H" | ||
| 7 | Disconnect combination relay (N10) or (N10/2) | ||
| 8 | Install in the reverse order |