LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 1997 >> C230 >> Repair and Diagnosis >> Accessories & Equipment >> Headlights >> Electrical System - Body -- 202 Chassis >> Testing & Repair >> Removing, installing fiber optic cable - AR82.70-P-0004A

Removing, installing fiber optic cable - AR82.70-P-0004A

MODEL 202.018 /02 /12 /13, 208.3 with CODE (316) MB D network telephone (D2B) with CODE (317) D network cellular telephone(D2B) with CODE (347) TELE AID emergency call system (D2B) 

Fiber optic cable installed in vehicle 

Fig 1: Identifying Fiber Optic Cable Remove/Install Components - Illustrated On Model 202 Sedan With Cellular Telephone
G04714130

Fiber optic cable installed in vehicle 

Fig 2: Identifying Fiber Optic Cable Remove/Install Components - Illustrated On Model 202 Sedan With Permanently Installed Telephone Or TELE-AID
G04714131
REMOVINGINSTALLING Removal, installation     
IMPORTANT Notes on fiber optic cable Models 129, 168, 170, 208, 210, 220 AH82.70-P-0001-02A
1 Expose fiber optic cable in question IMPORTANT The fiber optic cables are not bound into the wiring harness  
2 Release fiber optic cable connectors from control modules in question and remove NOTESDo not kink or stretch D2B fiber optic cable 
IMPORTANT Install caps on fiber optic cable connectors and module connectors
AR82.95-P-0005-01A
3 Remove and reinstall fiber optic cable module   AR82.70-P-0004-01A