Removing and installing license plate lamp - AR82.10-P-5161EA
MODEL 129, 202, 210.2
The figure shows removal of the license plate lamp on model 202 sedan.
Removal on the T-model 202 and model 210 and on roadster model 129 is identical.
| Removal, installation | |||
| 1 | Unscrew screws (46) | ||
| 2 | Take out license plate lamp (E19/1, E19/2) | Installation: Ensure that gasket is in good condition and properly seated. |
|
| 3 | Unplug electrical connections (47) | ||
| 4 | Install in the reverse order | ||
| 5 | Check for proper function |