Removing and installing navigation processor (APS) - AR82.61-P-7410F
MODEL 129 as of 1.1.98 with CODE (351) Auto-pilot system (APS)
MODEL 129 with retrofitted auto-pilot system (APS)
| Removal, installation | |||
| 1 | Connect quiescent current retention unit | *WH58.30-Z-1012-09A | |
| 2 | Disconnect ground lead from battery | AR54.10-P-0003A | |
| 3 | Pivot bracket for CD player with changer (1) to side | ||
| 4 | Remove rivet (2) and cover (3) | ||
| 5 | Loosen screws (4) | ||
| 6 | Disconnect connectors for GPS antenna (6) and electrical connection (5) | ||
| 7 | Remove APS navigation processor (A2/30) from bracket | ||
| 8 | Install in opposite order |
COMMERCIALLY AVAILABLE TOOLS
| Number | Designation |
|---|---|
| WH58.30-Z-1012-09A | Quiescent current retention unit |