Disposing on spring actuator - OS32.30-P-0620-01A
| Risk of injury to skin or eyes from hydraulic fluid spraying out under pressure. Risk of poisoning from swallowing hydraulic fluid. | Depressurize the hydraulic system completely before starting any work on the system. | AS00.00-Z-0013-01A | |
| Risk of injury caused by drilling gas-filled assemblies or components (noncombustible gases) | Wear protective clothing and safety glasses. Wear safety glasses and a face mask. | AS00.00-Z-0006-01A |
- Allow hydraulic fluid or brake fluid to flow out of the oil gallery (a) into a suitable container for disposal.
- Drill gas chamber (b) of the spring accumulator on the arched side (arrow) with a drill bit (3 mm dia.) until the gas flows out.
- Dispose of spring brake reservoir as scrap metal.