Disposing of damper strut - OS32.25-P-0120-01A
| Risk of injury from drilling gas-filled subassemblies or components (gas filling cannot ignite) | Wear safety glasses and face mask | AS00.00-Z-0006-01A |
- Drill damper strut in the area of the arrow with a 0.5 mm drill.
- Pump the damper strut empty by pressing the piston rod in several times. The quantity of oil is 250-500 cm 3 depending on the version.
Comply with regulations governing disposal of hydraulic oil
- Dispose of damper strut (old part).