Removing and installing covering on rear of front seat backrest - RA91001290065X(91-065)
Driver's seat cushion and backrest cushion removed (91-055) .
Covering on side of backrest frame removed (91-060) .
Operation no. of operation texts and work units or standard texts and flat rates
| Screw (1) | unscrew. |
| Screw (2) | unscrew. |
| Covering (3) | unhook at side of backrest frame (4 arrows) |
| Covering (3) | fold toward rear at top and remove upward |
| Covering (3) | Insert retaining clip at side on backrest bearing bolt and insert on backrest frame (arrows) |
| Continue to reinstall in opposite order. |
Removal, installation
- Unscrew screw.
- Unscrew screw on side at top.
- Unhook at side on backrest frame and fold toward rear at top and remove upward.
- Insert covering with retaining clip on side on backrest bearing bolt and insert on backrest frame.
- Continue to reinstall in opposite order.