Discontinuation of control module and rear axle switch (roll bar) - BT91.59-P-0001-01A

Model 129 as of 05/95 

MODEL 129 as of 1.5.95 

The following components are discontinued

• RB control module (crash deployment) (N53)
• Left rear axle switch (roll bar) (S83/2)
• Right rear axle switch (roll bar) (S83/3)

The function of the former RB control module (crash deployment) (N53) are integrated in the power soft top control module (N52).

Rear axle switches (roll bar) (S83/2) and (S83/3) are replaced by a tilting cone sensor (52°) integrated in the power soft top control module (N52).