Removing and installing expansion reservoir - AR47.10-P-8021D

MODEL 140 with CODE (282a) ski bag (through-loading facility) 

Fig 1: Identifying Skibag

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Fig 2: Identifying Front Mount And Skibag Mount

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Fig 3: Identifying Fuel Hoses, Vent Pipe And Expansion Reservoir

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

	Removal, installation
	Risk of explosion  from ignition. Risk of poisoning  from inhaling and swallowing fuel. Risk of injury  as a result of fuel coming into contact with skin and eyes.	No fire, naked flame or smoking. Pour fuels only into suitable and appropriately marked containers. Wear protective clothing when handling fuel.	AS47.00-Z-0001-01A
	If fuel tank is full, pump out about 8 liters of fuel
1	Release catches (arrows)
2	Pull skibag (79) out of skibag mount
3	Remove screws (79/1)
4	Release skibag mount (79/2) from the front mount (79/3) and pull out
5	Disconnect fuel hoses (91/6) from the fuel expansion reservoir (93)
6	Pull out fuel expansion reservoir (94); unclip vent pipes (91/2, 91/3), if necessary	Do not kink vent pipes
7	Install in the reverse order