Removing and installing trunk lid IR receiver (A26/3) - AR80.30-P-4350CA
MODEL 140 up to 30.11.94
MODEL 140 as of 1.6.96 up to 31.5.97 with CODE (491) USA version
| Removal, installation | |||
|---|---|---|---|
| 1 | Open cover (1) on left and right taillamp | ||
| 2 | Remove cover on rear center piece (2) | ||
| 3 | Disconnect electrical wires | ||
| 4 | Unscrew mounting screws (17) for trunk lock | ||
| 5 | Remove lock (10) with infrared receiver (A26/3) | ||
| 6 | Pry off pneumatic line with open end wrench (7 mm wrench) | ||
| 7 | Press in catch lug (arrow) and pull off IR receiver (A26/3) | ||
| 8 | Reinstall in opposite order | ||