Removing and installing wire cable / transmission for parking shift lock on transmission - AR27.60-P-0500-05B

For removal and installation, move selector lever or range selector lever to position "P" and, with control cable / gears removed, leave in position "P".

Removing 

1. Turn cable/transmission (80) on transmission counterclockwise and remove.
   Fig 1: Identifying Turn Cable/Transmission (80) On Transmission Counterclockwise

   Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

   Installation 

2. Install cable/transmission (80) and turn clockwise

   After installation, adjust cable for parking shift lock and check for proper operation.

   Fig 2: Identifying Cable/Transmission And Turn Clockwise

   Courtesy of MERCEDES-BENZ OF NORTH AMERICA.