Post-Collision Inspection
WARNING: This page is about a different car, the 1997 Mercedes-Benz E420, 1997 Mercedes-Benz E320, and 1997 Mercedes-Benz E300. However, it is still accessible from the selected car via links, so may be relevant.
POST-COLLISION AIR BAG SAFETY INSPECTION
| Action | Component |
|---|---|
| Replace After Deployment | Air Bag Module(s) ETR Seat Belt Assemblies (Deployed Assemblies) Passenger Side Air Bag Installation Frame SRS Control Unit Steering Wheel |
| Inspect & If Damaged, Replace Component (Even If Air Bag Did Not Deploy) | Any Parts Which Fault Codes Indicate Are Faulty Instrument Panel SRS Mounting Brackets & Location SRS Wiring Harness |
| Comments | DO NOT attempt SRS wiring harness repairs. In the event of any collision, side bags & sensors should be inspected and replaced if damaged or deployed. |