Align conrod - AR03.10-P-6111-04HA
Engine 604, 605, 606
Inspection data of connecting rod
| Number | Designation | Engine 604, 605.910/911/912, 606.910/912 | Engine 605.960/962, 606.961/962/964 | ||
|---|---|---|---|---|---|
| BE03.10-P-1003-01C | Dimension | permissible twist of conrod bearing bore to conrod bush bore over a length of 100 mm | mm | 0.1 | 0.1 |
| BE03.10-P-1004-01C | Dimension | Permissible variation of axial parallelism of conrod bearing bore to conrod bush bore over a length of 100 mm | mm | 0.045 | 0.045 |
Commercially available tools
| Number | Designation |
|---|---|
| WH58.30-Z-1008-05A | Connecting rod tester |
| WH58.30-Z-1009-05A | Conrod straightening equipment |
- Inspect conrod with fitted bearing shells and conrod bolts using a connecting rod tester.
- Align connecting rod bearing hole in parallel with connecting rod bush bore on connecting rod tester.
- Align axle twist of connecting rod bearing hole with connecting rod bush bore on connecting rod tester.