Raise engine - AR01.10-P-7500-03HA

Shown on engine 604 

1. Attach engine hoist (50) to the front and rear engine lifting eye.

   When attaching to the front engine lifting eye, ensure that the injection line is not damaged.

   Insert shackle (01) as intermediate piece, if necessary.

2. Adjust engine hoist so that the engine is raised evenly at the front and back.
   Fig 1: Identifying Engine Hoist And Shackle

   Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

1. 3.1 Engine 606.961/962: Attach chain to exhaust manifold and hang at the third mounting hook of engine hoist

   Raise engine carefully and pay attention to position; lower once again, if necessary, and adjust length of chain.

2. 4 Raise engine fully.
   Fig 2: Attaching Chain To Exhaust Manifold And Hang At Mounting Hook Of Engine Hoist

   Courtesy of MERCEDES-BENZ OF NORTH AMERICA.