Separating oil pump chain - AR18.10-P-2140-01HA

Modification notes

6.5.96

Special tool modified and incorporated Procedure modified

See step 1-6

Fig 1: Case (602 589 00 98 00)

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Fig 2: Thrust Spindle (602 589 05 63 00)

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Fig 3: Chain Separating Tool (602 589 02 33 00)

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Fig 4: Thrust Pins (602 589 05 63 01)

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Bolt in pressure screw (02) with pressure pin (02a) into chain-separating tool (03).
Position chain separating tool (03) against oil-pump chain.
Position chain separating tool (03) onto oil-pump chain bolts (arrow).
Turn in pressure screw (02) until pressure pin (02a) makes contact with oil-pump chain bolts.
Screw in pressure pin (02a), press out oil-pump chain bolts (arrow).

Fig 5: Identifying Position Chain Separating Tool Against Oil-Pump Chain
Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
Unscrew thrust spindle (02), take off chain separating tool (03).
Pull removed oil-pump chain bolts (1) out of chain separating tool (03).

Fig 6: Identifying Chain Separating Tool
Courtesy of MERCEDES-BENZ OF NORTH AMERICA.