Separate oil pump chain - AR18.10-P-2140-01V

Fig 1: Identifying Case (602 589 00 98 00)

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Fig 2: Identifying Thrust Spindle (602 589 05 63 00)

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Fig 3: Identifying Chain Separating Tool (602 589 02 33 00)

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Fig 4: Identifying Thrust Pins (602 589 05 63 01)

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

1. Screw pressure screw (02) with pressure pin (02a) into chain-separating tool (03).
2. Fit chain separating tool (03) onto oil pump chain.
3. Screw in pressure screw (02) as far as necessary until the closely at the oil pump chain pin (arrow).
4. Screw in pressure pin (02a) and press out oil pump chain pin.
   Fig 5: Identifying Pressure Screw, Pressure Pin And Chain Spring Tool

   Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
5. Unscrew pressure screw (02) and remove chain separating tool (03).
6. Remove oil pump chain pin (1) from chain separating tool (03).
   Fig 6: Identifying Pressure Screw And Chain Spring Tool

   Courtesy of MERCEDES-BENZ OF NORTH AMERICA.