Riveting oil pump chain - AR18.10-P-2140-02HA

Fig 1: Case (602 589 00 98 00)

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Fig 2: Riveting Tool (602 589 00 39 00)

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Fig 3: Assembly Inserts (103 589 01 63 00)

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Connect new oil pump chain (3) to old oil pump chain (2) with the riveted link (4) and the outer plate (5).
Slowly rotate crankshaft in direction of rotation of the engine until the ends of the new oil pump chain (3) can be connected.
Detach old oil pump chain (2) and connect the ends of the new oil pump chain (3) with the riveted link (4).
Insert riveted link (4) from behind.

Fig 4: Identifying Riveted Link And Outer Plate
Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Fig 5: Identifying Riveted Link From Behind
Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
Insert guide piece with the number F2 into the riveting tool (arrow) and screw on with the screw (28) (Fig. A).
Place moving thrust piece with the figure 2 (arrow) into the riveting tool (Fig. B).

Fig 6: Identifying Riveting Tool
Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Fig 7: Identifying Guide Piece With Number
Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
Insert outer plate (5) into the thrust piece with the figure 2 (arrow), (Fig. C).

Fig 8: Identifying Outer Plate Into Thrust Piece
Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
Position riveting tool so that the spacer webs (arrow) are resting on the rollers of the riveted link (Fig. D).
Tighten spindle (04) until firm resistance is felt.
When turning the spindle (04), ensure that the pins of the riveted link move into the holes of the outer plate (5).
Take off riveting tool.

Fig 9: Identifying Off Riveting Tool
Courtesy of MERCEDES-BENZ OF NORTH AMERICA.