Pressing in centering sleeve - AR41.10-P-0200-03A

Test values of propeller shaft centering sleeve

Number	Designation			Models 210.003/004 with manual transmission	Models 210.003/004/237 with manual transmission and code 450	Models 210.003/004 with 5-speed automatic transmission (with drive/ overrun-soft front flexible disc)
BE41.10-P-1001-02D	Press-in distance "a" from end face of centering sleeve to propeller shaft flange	Front propeller shaft	mm	36.5	32.7	28.8
		Rear propeller shaft	mm	24.9	24.9	24.9
		Illustration see		AR41.10-P-0200-03A	AR41.10-P-0200-03A	AR41.10-P-0200-03A

Test values of propeller shaft centering sleeve

Number	Designation			Model 210.003 with 5-speed automatic transmission (with hard front flexible disc)	Model 210.004 with 5-speed automatic transmission	Models 210.006/007/065/206/265
BE41.10-P-1001-02D	Press-in distance "a" from end face of centering sleeve to propeller shaft flange	Front propeller shaft	mm	24.9	24.9	26.8
		Rear propeller shaft	mm	24.9	24.9	26.8
		Illustration see		AR41.10-P-0200-03A	AR41.10-P-0200-03A	AR41.10-P-0200-03A

Test values of propeller shaft centering sleeve

Number	Designation			Models 210.08/28	Models 210.010/210 with 5-speed automatic transmission	Models 210.010/210 with 4-speed automatic or manual transmission
BE41.10-P-1001-02D	Press-in distance "a" from end face of centering sleeve to propeller shaft flange	Front propeller shaft	mm	24.9	28.8	32.7
		Rear propeller shaft	mm	25.7	24.9	24.9
		Illustration see		AR41.10-P-0200-03A	AR41.10-P-0200-03A	AR41.10-P-0200-03A

Test values of propeller shaft centering sleeve

Number	Designation			Models 210.015/045/215 /245 with 5-speed manual transmission	Models 210.016/216 with 5-speed automatic transmission	Models 210.017/217 with manual transmission
BE41.10-P-1001-02D	Press-in distance "a" from end face of centering sleeve to propeller shaft flange	Front propeller shaft	mm	34.8	28.3	33.7
		Rear propeller shaft	mm	26.8	36.3	25.7
		Illustration see		AR41.10-P-0200-03A	AR41.10-P-0200-03A	AR41.10-P-0200-03A

Test values of propeller shaft centering sleeve

Number	Designation			Models 210.017/ 217 with 5-speed automatic transmission	Models 210.020/ 220/610	Models 210.020/220
BE41.10-P-1001-02D	Press-in distance "a" from end face of centering sleeve to propeller shaft flange	Front propeller shaft	mm	25.7	24.9	28.8
		Rear propeller shaft	mm	25.7	24.9	24.9
		Illustration see		AR41.10-P-0200-03A	AR41.10-P-0200-03A	AR41.10-P-0200-03A

Test values of propeller shaft centering sleeve

Number	Designation			Models 210.025/070/ 072/225/270/272	Models 210.035/235 with 5-speed manual transmission	Models 210.035/235 with 4-speed automatic transmission
BE41.10-P-1001-02D	Press-in distance "a" from end face of centering sleeve to propeller shaft flange	Front propeller shaft	mm	24.8	36.5	32.7
		Rear propeller shaft	mm	28.3	24.9	24.9
		Illustration see		AR41.10-P-0200-03A	AR41.10-P-0200-03A	AR41.10-P-0200-03A

Test values of propeller shaft centering sleeve

Number	Designation			Model 210.035 with code 580	Models 210.035/235 with 5-speed automatic transmission	Models 210.035/235 with manual transmission and code 450 with and without code 580
BE41.10-P-1001-02D	Press-in distance "a" from end face of centering sleeve to propeller shaft flange	Front propeller shaft	mm	32.7	24.9	32.7
		Rear propeller shaft	mm	24.9	24.9	24.9
		Illustration see		AR41.10-P-0200-03A	AR41.10-P-0200-03A	AR41.10-P-0200-03A

Test values of propeller shaft centering sleeve

Number	Designation			Models 210.037/237 with 5-speed automatic transmission	Model 210.037 with 4-speed automatic or manual transmission	Models 210.045/245 with 5-speed automatic transmission
BE41.10-P-1001-02D	Press-in distance "a" from end face of centering sleeve to propeller shaft flange	Front propeller shaft	mm	28.8	32.7	26.8
		Rear propeller shaft	mm	24.9	24.9	26.8
		Illustration see		AR41.10-P-0200-03A	AR41.10-P-0200-03A	AR41.10-P-0200-03A

Test values of propeller shaft centering sleeve

Number	Designation			Model 210.053 with automatic transmission	Model 210.053 with manual transmission	Models 210.055/663
BE41.10-P-1001-02D	Press-in distance "a" from end face of centering sleeve to propeller shaft flange	Front propeller shaft	mm	25.7	30.9	25.7
		Rear propeller shaft	mm	25.7	25.7	25.7
		Illustration see		AR41.10-P-0200-03A	AR41.10-P-0200-03A	AR41.10-P-0200-03A

Test values of propeller shaft centering sleeve

Number	Designation			Models 210.062/262 with automatic transmission	Models 210.061/261 with 5-speed automatic transmission	Models 210.061/261 with 5-speed manual transmission
BE41.10-P-1001-02D	Press-in distance "a" from end face of centering sleeve to propeller shaft flange	Front propeller shaft	mm	26.8	24.9	32.7
		Rear propeller shaft	mm	26.8	24.9	24.9
		Illustration see		AR41.10-P-0200-03A	AR41.10-P-0200-03A	AR41.10-P-0200-03A

Test values of propeller shaft centering sleeve

Number	Designation			Model 210.063 with 5-speed manual transmission	Model 210.063 with automatic transmission	Model 210.063 with automatic transmission
BE41.10-P-1001-02D	Press-in distance "a" from end face of centering sleeve to propeller shaft flange	Front propeller shaft	mm	38.8	25.7	26.8
		Rear propeller shaft	mm	26.8	25.7	26.8
		Illustration see		AR41.10-P-0200-03A	AR41.10-P-0200-03A	AR41.10-P-0200-03A

Test values of propeller shaft centering sleeve

Number	Designation			Models 210.074/274 (AMG) with automatic transmission	Model 210.235 with code 580	Model 210.237 with manual transmission
BE41.10-P-1001-02D	Press-in distance "a" from end face of centering sleeve to propeller shaft flange	Front propeller shaft	mm	22.4	36.5	36.5
		Rear propeller shaft	mm	25.9	24.9	24.9
		Illustration see		AR41.10-P-0200-03A	AR41.10-P-0200-03DA	AR41.10-P-0200-03A

Test values of propeller shaft centering sleeve

Number	Designation			Model 210.237 with manual transmission and code 450	Model 210.617 with manual transmission	Model 210.617 with automatic transmission
BE41.10-P-1001-02D	Press-in distance "a" from end face of centering sleeve to propeller shaft flange	Front propeller shaft	mm	32.7	25.7	33.7
		Rear propeller shaft	mm	24.9	25.7	25.7
		Illustration see		AR41.10-P-0200-03DA	AR41.10-P-0200-03A	AR41.10-P-0200-03A

Press in new centering sleeve using a suitable mandrel.

Observe press-in distance "a" from end face of centering sleeve to flange.

Depending on the flexible disc thickness the specified press-in distance "a" may differ. The distance measured should then be taken into account before removing.

Fig 1: Pressing Centering Sleeve Using Suitable Mandrel

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Fig 2: Measuring Distance From Centering Sleeve To Flange

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.