Switching on interior lighting with anti-theft alarm, function - GF82.20-P-2007A

MODEL 202 as of 1.6.97, 208, 210.081 /281, 210 (except 210.081 /281) as of 1.3.97 

When the anti-theft alarm (ATA)  trips or the taxi emergency alarm  is actuated the interior lighting is switched on. The PSE control module (combined) (A37)  sends a corresponding CAN message during the alarm. The overhead control panel control module (N70)  switches on the front dome lamp (N70e1)  . The rear dome lamp (E15/3)  is switched on by the PSE control module (not on model 208.4). In the case of a taxi emergency alarm  only the rear dome lamp (E15/3)  is switched on.

If the alarm is interrupted the interior lighting is switched back off.

On model 210 with code 877 dome lamp (E15/3e3)  and reading lamps (E15/3e1, E15/3e2)  are switched on in the rear dome lamp (E15/3).

	Control of interior lighting switch-on time, function	GF82.20-P-3001A
	Dimming interior lighting, function	GF82.20-P-3002A
	Control of rear dome lamp, function: except model 208.4 (convertible)	GF82.20-P-4005A
	Overhead control panel control module, location/purpose/design/function: except model 208.4 (convertible)	GF82.20-P-4101A
	Model 208.4 (convertible)	GF82.20-P-4101KA
	Anti-theft alarm (EDW): up to 5/98	GF80.50-P-0001B
	as of 6/98	GF80.50-P-0001F
	Rear dome lamp, location/purpose/design/function: Model 210.0 as of 6/98 with code 877	GF82.20-P-4109A