Remove/install rear seat and rear seat backrest - AR91.12-P-1700E

MODELS 202.01 /02 /12 /13 

Fig 1: Identifying Rear Seat And Rear Seat Backrest Remove/Install Components - Models 202.01 /02 /12 /13

	Remove
1	Press both release levers (2) and lift rear seat cushion (1)
2	Remove rear seat cushion (1)
3	Unscrew the screws (3) on the lower left and right and center of the side of the rear backrest frame
4	Lift rear backrest (4) upwards and remove
	Install
5	Insert damping mat and expose sheet metal lugs for rear seat cushion (1)
6	Insert rear backrest	Insert plug-in brackets (arrows) at the top of the rear wall; expose rear seat belts.
7	Unscrew the screws (3) on the lower left and right and center of the side of the rear backrest frame
8	Insert rear seat cushion	Expose lap belt and seat belt lock. Insert rear seat cushion (1) at the back in the two sheet metal lugs and lock in position at the front.