Description & Operation

WARNING: This page does not describe the selected car, but rather 56 other vehicles, including the 1999 Mercedes-Benz CLK430, 1999 Mercedes-Benz CLK320, 1998 Mercedes-Benz E430, 1998 Mercedes-Benz E320, and 1998 Mercedes-Benz E300. However, it is still accessible from the selected car via links, so may be relevant.

Power mirror adjustment is sent as a CAN data message from lower control field control module to corresponding door control module. The door control module sends the signal to corresponding mirror.

The voltage coded memory signal from driver's door control switch is recorded in the driver's door control module. The driver's door control module in turn directly actuates driver's side mirror and sends a signal through the CAN data lines to passenger's door control module. The passenger's door control module then actuates passenger's side mirror.

When gear selector in placed in Reverse, a signal from reverse light switch is sent to the lower control field control module. The lower control field control module then send that signal to passenger's door control module through CAN data line. The passenger's door control module then actuates passenger's side mirror.