LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 1996 >> C36 >> Repair and Diagnosis >> Drivelines & Axles >> Differentials & Drive Axles >> Differentials & Axle Shafts - C36, C280, E300, E320, S320, S420S, 500, S600, SL320, SL500 & SL600 >> Removal & Installation >> Axle Shafts >> Removal & Installation (S320, S350, S420 & S500)

Removal & Installation (S320, S350, S420 & S500)

  1. Raise and support vehicle. Using a 32-mm 12-point socket, remove rear axle shaft collar nut. Remove axle shaft flange to differential bolts. Support inner axle shaft.
  2. DO NOT allow axle shaft to hang against outer CV joint. Using a press, remove axle shaft from hub flange. Remove axle shaft from vehicle. To install, reverse removal procedure. See TORQUE SPECIFICATIONS.
scientia non olet · About LEMON Manuals