Removing and installing rear roof frame cover - AR68.30-P-4470A

MODELS 202.07 /08 /18, 210.2 

Model 202 

Fig 1: Identifying Rear Roof Frame Cover Components - Model 202

Model 210 

Fig 2: Identifying Rear Roof Frame Cover Components - Model 210

	Removing, installing
1	Remove paneling on C-pillar	Model 202	AR68.30-P-4490EA
		Model 210	AR68.30-P-4490FA
2	Remove mount for double sun shade (3)
3	Unclip side roof frame cover (2) and pull out downward
4	Pull out rear lamp (4) downward
5	Unclip center roof frame cover (1) downward and pull out toward front
6	Install in the reverse order	Installation:  Model 210.2 with folding bench storage compartment, opposite the direction of motion (Code 844) When replacing the roof frame trim openings must be made at the rear for the belt deflectors. Refer to: ↓
		Stamping opening in trim of rear roof frame With window-bag (code 290)	AN68.30-4470-01FA
		Make opening in trim of rear roof frame With window-bag (code 290)	AN68.30-P-4470-02FA