Adjusting wiper system - AR82.30-P-6400-01E

Revisions

27.2.97

Adjustment values for model 210 added

Test and adjustment data wiper

Number	Designation			Model 202	Model 208
BE82.30-P-1001-01A	Dimensions	Distance "A" between wiper gear head and windshield	mm	5-8	8-12
		See figure		AR82.30-P-6400-01E	AR82.30-P-6400-01E
BE82.30-P-1002-01A	Dimensions	Distance "B" between wiper arm and wiper blade	mm	5	5
		See figure		AR82.30-P-6400-01E	AR82.30-P-6400-01E

Test and adjustment data wiper

Number	Designation			Model 210
BE82.30-P-1001-01A	Dimensions	Distance "A" between wiper gear head and windshield	mm	8-12
		See figure		AR82.30-P-6400-01E
BE82.30-P-1002-01A	Dimensions	Distance "B" between wiper arm and wiper blade	mm	5
		See figure		AR82.30-P-6400-01E

Fig 1: Identifying Feeler Gauge (129 589 03 21 00)

1. Check distance "A", wiper gear head - windshield using a feeler gauge.
   Fig 2: Checking Distance Between Wiper Gear Head And Windshield Using Feeler Gauge

   
2. The distance from wiper gear head to windshield can be adjusted by slackening the bolt (2). Wiper arm must be in vertical position.
   Fig 3: Identifying Adjusting Bolt

   
3. Check distance "B", wiper arm - wiper blade using a feeler gauge.
4. If the distance is less than 5 mm, bend wiper arm toward windshield until the gauge can be inserted.
   Fig 4: Identifying Distance Between Wiper Arm And Wiper Blade