Adjusting shift rod - AR27.60-P-0980B

TRANSMISSION 722.6 in MODEL 129, 140, 163, 170, 202, 208, 210 

TRANSMISSION 722.610 in MODEL 463.209 /232 /233 

TRANSMISSION 722.611 in MODEL 463.308 /330 /331 

TRANSMISSION 722.630 in MODEL 463.206 /240 /241 

Fig 1: Identifying Shift Rod Adjusting Components - Transmission 722

	Adjust
	Vehicle must be horizontal and standing on its wheels	Position vehicle on the four column lifting platform.
1	Move selector lever to position "D".	Have an assistant hold the selector lever in position "D" for the entire duration of the adjustment work.
2	Mount head (98) on intermediate lever (97) and secure with clip	Pliers	Figure
3	Guide shift rod (63) into head, attach at selector lever (33) and secure with clip	Pliers	Figure
4	Tighten bolt (99)	Press against rod head (98) to tighten. Do not twist shift rod (63) or rod head (98). Do not move selector lever (33) out of position "D".
			*BA27.60-P-1001-04A
5	Check function

TIGHTENING TORQUES FOR SHIFT ROD

Fig 2: Identifying Pliers (210 589 00 37 00)