LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 1996 >> C280 >> Repair and Diagnosis >> Suspension >> Rear Suspension >> Suspension - Rear >> Torque Specifications

Torque Specifications

TORQUE SPECIFICATIONS

Application Ft. Lbs. (N.m)
Axle Carrier-To-Frame Bolt (1) 66 (90)
Axle Shaft Collar Nut (2) 162 (220)
Axle Shaft Flange-To-Differential Bolt (1)(3)
10-mm 52 (70)
12-mm (4)
Brake Caliper Bolt (1) (5)
Camber Link-To-Axle Carrier Nut (1) 52 (70)
Camber Link-To-Wheel Carrier Nut (1) 30 (40)
Differential-To-Axle Carrier Bolt (1)
Front 33 (45)
Rear 81 (110)
Drive Shaft Bearing-To-Frame Bolt
Bolt With Washer 18 (25)
Bolt With Collar 22 (30)
Drive Shaft Clamp Nut 22-30 (30-40)
Drive Shaft Coupling-To-Pinion Flange Bolts (1)
10-mm 30 (40)
12-mm 44 (60)
Lower Suspension Arm-To-Axle Carrier Nut (1) 52 (70)
Lower Suspension Arm-To-Wheel Carrier Nut (1) 89 (120)
Radius Rod-To-Axle Carrier Nut (1) 52 (70)
Radius Rod-To-Wheel Carrier Nut (1) 52 (70)
Shock Absorber Lower Bolt (1) 41 (55)
Stabilizer Bar-To-Lower Suspension Arm 15 (20)
Thrust Arm-To-Axle Carrier Nut (1) 52 (70)
Thrust Arm-To-Wheel Carrier Nut (1) 30 (40)
Track Rod-To-Axle Carrier Nut (1) 52 (70)
Track Rod-To-Wheel Carrier Nut (1) 26 (35)
INCH Lbs. (N.m) 
ABS Sensor Bolt (1) 71 (8)
(1) Replace self-locking bolt and/or nut.
(2) Before installing, lubricate threads.
(3) Before installing, lubricate bolt threads and bolt head contact area.
(4) Information not available from manufacturer.
(5) Brake caliper bolt torque specification is not available at time of publication.