Pressing in centering sleeve - AR41.10-P-0200-03DC
TEST VALUES OF PROPELLER SHAFT CENTERING SLEEVE
| Number | Designation | Model 170.435 with 5-speed manual transmission | Model 170.435 with 6-speed manual transmission | Model 170.435 with automatic transmission | ||
|---|---|---|---|---|---|---|
| BE41.10-P-1001-02E | Press-in distance "a" from end face of centering sleeve to propeller shaft flange | Front propeller shaft | mm | 36.5 | 24.9 | 28.8 |
| Rear propeller shaft | mm | 24.9 | 24.9 | 24.9 | ||
| Illustration see | AR41.10-P-0200-03DB | AR41.10-P-0200-03DC | AR41.10-P-0200-03DB | |||
TEST VALUES OF PROPELLER SHAFT CENTERING SLEEVE
| Number | Designation | Models 208.335/435 with 5-speed manual transmission and code 580 | Models 170.445/447 with 5-speed manual transmission or with automatic transmission | Models 170.445/447 with 6-speed manual transmission | ||
|---|---|---|---|---|---|---|
| BE41.10-P-1001-02E | Press-in distance "a" from end face of centering sleeve to propeller shaft flange | Front propeller shaft | mm | 32.7 | 34.8 | 26.8 |
| Rear propeller shaft | mm | 24.9 | 26.8 | 26.8 | ||
| Illustration see | AR41.10-P-0200-03DC | AR41.10-P-0200-03DC | AR41.10-P-0200-03DC | |||
TEST VALUES OF PROPELLER SHAFT CENTERING SLEEVE
| Number | Designation | Models 208.335/435 with 5-speed manual transmission | Models 208.335/435 with 6-speed manual transmission | Models 208.335/435 with 5-speed manual transmission and code 580 | ||
|---|---|---|---|---|---|---|
| BE41.10-P-1001-02F | Press-in distance "a" from end face of centering sleeve to propeller shaft flange | Front propeller shaft | mm | 36.5 | 24.9 | 32.7 |
| Rear propeller shaft | mm | 24.9 | 24.9 | 24.9 | ||
| Illustration see | AR41.10-P-0200-03DC | AR41.10-P-0200-03DC | AR41.10-P-0200-03DC | |||
TEST VALUES OF PROPELLER SHAFT CENTERING SLEEVE
| Number | Designation | Models 208.335/435 with automatic transmission | Models 208.345/445 with 5-speed manual transmission | Models 208.345/445 with 6-speed manual transmission | ||
|---|---|---|---|---|---|---|
| BE41.10-P-1001-02F | Press-in distance "a" from end face of centering sleeve to propeller shaft flange | Front propeller shaft | mm | 24.9 | 34.8 | 26.8 |
| Rear propeller shaft | mm | 24.9 | 26.8 | 26.8 | ||
| Illustration see | AR41.10-P-0200-03DC | AR41.10-P-0200-03DC | AR41.10-P-0200-03DC | |||
TEST VALUES OF PROPELLER SHAFT CENTERING SLEEVE
| Number | Designation | Models 208.345/445 with automatic transmission | Models 208.347/447 with 5-speed manual transmission | Models 208.347/447 with 6-speed manual transmission | ||
|---|---|---|---|---|---|---|
| BE41.10-P-1001-02F | Press-in distance "a" from end face of centering sleeve to propeller shaft flange | Front propeller shaft | mm | 30.9 | 34.8 | 26.8 |
| Rear propeller shaft | mm | 26.8 | 26.8 | 26.8 | ||
| Illustration see | AR41.10-P-0200-03DC | AR41.10-P-0200-03DC | AR41.10-P-0200-03DC | |||
TEST VALUES OF PROPELLER SHAFT CENTERING SLEEVE
| Number | Designation | Models 208.347/447 with automatic transmission | Models 208.365/465 | Models 208.370/374/ 470 | ||
|---|---|---|---|---|---|---|
| BE41.10-P-1001-02F | Press-in distance "a" from end face of centering sleeve to propeller shaft flange | Front propeller shaft | mm | 30.9 | 26.8 | 24.8 |
| Rear propeller shaft | mm | 26.8 | 26.8 | 28.3 | ||
| Illustration see | AR41.10-P-0200-03DC | AR41.10-P-0200-03DC | AR41.10-P-0200-03DC | |||
Press in new centering sleeve using a suitable alignment tool.
Observe press-in distance "a" from end face of centering sleeve to flange
Depending on the flexible disc thickness the specified press-in distance "a" may differ. The distance measured should then be taken into account before removing.