Removing and installing cellular telephone interface - AR82.70-P-7379EA
MODEL 208.3 as of 1.7.00 with CODE (854) MB cellular telephone
Fig 1: Identifying Cellular Telephone Interface Remove/Install Components - Model 208.3 As Of 1.7.00 With Code (854)
| Removal, installation | |||
| 1 | Connect quiescent current retention unit | *WH58.30-Z-1012-09A | |
| Risk of explosion from explosive gas. Risk of poisoning and caustic burns from swallowing battery electrolyte. Risk of injury from caustic burns to eyes and skin from battery electrolyte or from handling damaged lead acid batteries. | No fire, sparks, naked flames or smoking. Wear acid-protective gloves, clothing and eye protection. Pour battery electrolyte only into suitable and appropriately marked containers. | AS54.10-Z-0001-01A | |
| 2 | Disconnect ground cable of battery | AR54.10-P-0003A | |
| Notes on battery | All models. | AH54.10-P-0001-01A | |
| 3 | Remove side cover on left side of trunk | ||
| 4 | Unscrew nut (3) | ||
| 5 | Carefully lift cradle (1) with control modules out of spare wheel recess | ||
| 6 | Release coupling on control modules and remove | ||
| 7 | Disconnect antenna cable on E-network compensator (A28/3) | ||
| 8 | Loosen sheet metal screw (2) | ||
| 9 | Remove telephone interface (A34/4) | ||
| 10 | Install in the reverse order |
COMMERCIALLY AVAILABLE TOOLS
| Number | Designation |
|---|---|
| WH58.30-Z-1012-09A | Quiescent current retention unit |