Removing and installing bulbs in headlamp unit - AR82.10-P-1201ED

MODEL 202 as of 1.9.96 

Fig 1: Identifying Bulbs Headlamp Remove/Install Components - Model 202 As Of 1.9.96

	Removal, installation
1	Open engine hood, move to upright position		AR88.40-P-1000E
2	Unclip housing cover (low beam headlamp, fog lamp, parking lamp) (2a) and remove	For right headlamp unit remove air intake pipe
3	Open locking bow (1)
4	Remove housing cover (high beam headlamp) (2b)
5	Disconnect electrical connectors on bulb in question
6	Open retaining clamp on bulb in question
7	Remove bulb	Do not touch glass on bulb with bare fingers, use grease-free, soft rag. Ensure that installation position is correct.
8	Reinstall in opposite order