Removing and installing cradle for cellular telephone - AR82.70-P-8918F

MODEL 202, 210 from 1.7.98 to 30.6.99 with CODE (312) GSM cellular telephone 

MODEL 202, 210 from 1.7.99 to 30.6.00 with CODE (317) GSM cellular telephone (D2B) In connection with Audio series radio 

MODEL 170, 208.3, 129 from 1.7.99 to 30.6.00 with CODE (312) GSM cellular telephone 

Illustrated on model 202 up to 6.99 

Illustrated on model 202 as of 7.99 

Illustrated on model 210 up to 6.99 

Illustrated on model 210 as of 7.99 

Illustrated on model 170 as of 7.99 

Illustrated on model 129 as of 7.99 

	Removal, installation
1	Remove radio		AR82.60-P-7502EA
2	Fold up cover on center console (screwed)	See: ↓
		Model 170: Remove cover on center console	AR68.20-P-2350G
		Model 202: Remove cover on center console	AR68.20-P-2350E
		Model 208: Remove cover on center console	AR68.20-P-2350K
		Model 210: Remove cover on center console	AR68.20-P-2350F
3.1	Remove ashtray in center console	Model 202	AR68.20-P-2400E
3.2	Remove spectacles or cassette compartment	Model 210	AR68.20-P-2450F
4	Remove console (2)	The console (2) is inserted into the center console and fastened with screw (1).
5	Separate connector for cellular telephone wiring harness (16) and antenna connection (17)	With cradle (cellular telephone, 5) as of 6/99 the loudspeaker is not connected.
6	Remove cradle (cellular telephone, 5)	Loosen screw (4) and push cradle (cellular telephone, 5) upward.
7	Remove base holder (8)	Loosen screw (7).
8	Install in the reverse order