Removing and installing automatic antenna - AR82.62-P-8105EA

MODEL 129 

MODEL 202.01 /02 /12 with CODE (531) Automatic antenna with CODE (538) Automatic antenna and front speakers-without radio with CODE (491) USA version 

MODEL 210.0 /6 with CODE (491) USA version 

Illustrated on model 202 

Fig 1: Identifying Automatic Antenna Remove/Install Components - Illustrated On Model 202

	Removal, installation
1.1	Remove receiver and amplifier	Model 129	AR82.62-P-7721A
2	Disconnect ground lead from battery		AR54.10-P-0003A
3	Unscrew screw (77)
4	Unscrew screw (78)
5	Remove automatic antenna (M11) toward bottom	Model 202 with antenna splitter Model 210 without antenna splitter The antenna head is held in the fender by a rubber grommet.
6	Disconnect electrical connector (82)
7	Unscrew RF lead (81)
8	Install in opposite order