Removing and installing push-button control module for automatic heater or air conditioning (Tempmatic) - AR83.25-P-1120F
MODEL 202 as of 1.9.95 except CODE (581a) Air conditioning (automatic)
MODEL 210 except CODE (581a) Air conditioning (automatic)
Illustrated on model 202 with air conditioning (Tempmatic)
Fig 1: Identifying Catch Lugs And A/C Push-button Control Module - Illustrated On Model 202 With Air Conditioning (Tempmatic)
| Removal, installation | |||
| 1 | Remove wooden cover | Model 202 | AR68.20-P-2350E |
| Model 210 | AR68.20-P-2350F | ||
| 2 | Press catch lugs (1) out and pull out A/C push-button control module (N19) | ||
| 3 | Reinstall in opposite order | When installing first insert left air distribution linkage, then right air distribution linkage, then slide in A/C push-button control module until it catches. When replacing the A/C push-button control module version coding is required. |