Using fixing mounts and templates - AR68.20-P-2030-02G
COMMERCIALLY AVAILABLE TOOLS
| Number | Designation |
|---|---|
| WH58.30-Z-1011-20A | Universal profile milling machine with surface milling cutter (3 single lip miller Ø 5 x 60mm, 2 single lip miller Ø 5 x 90mm, templates, fixing supports for model 129, 170, 202, 208, 210, 463), Firma Fetzer GmbH 75446 Wiernsheim-Pinache |
Top cover
Fasten cover on mount with tape.
It is necessary to use the aluminum strips AAL/202 (6 x 20 x 120) provided between the cover and upper section of the milling table in the area of the switch cutout.