Adjusting glove compartment lid - AR68.10-P-1300E

MODEL 202 

Fig 1: Identifying Glove Compartment Lid Component Adjustment Components

	Adjusting
	Pay attention to uniform transition and gap width (arrows) between glove compartment cover (1) and instrument panel (2)
1	Loosen striker eye (4)
2	Remove glove compartment		AR68.10-P-1400E
3	Adjust side gap	For this purpose loosen hinge (7)
4	Adjust horizontal gap	For this purpose tighten or slacken (6)
5	Reinstall glove compartment		AR68.10-P-1400E
6	Check for easy movement and proper operation