Removing and installing telescope of automatic antenna - AR82.62-P-8200EA
MODEL 129
MODEL 202.01 /02 /12 with CODE (531) Automatic antenna
MODEL 202.01 /02 /12 with CODE (538) Automatic antenna and front loudspeakers - without radio
Illustrated on model 202
| Removal | |||
| 1 | Unscrew securing nut (74) | ||
| 2 | Have radio switched on by second person and pull out extending telescope (75) with plastic cable (76) | ||
| Installation | |||
| 3 | Insert plastic cable (76) with the splines in opposite direction of travel | ||
| 4 | Have 2nd person switch off radio | ||
| 5 | Retract plastic cable (76) and telescope (75) fully | ||
| 6 | Screw on securing nut (74) | ||
| 7 | Perform operational check |