Removing and installing transmitter/receiver - AR82.70-P-8911BB
MODEL 129 as of 1.7.00 with CODE (853) MB standard cellular telephone
| Removal, installation | |||
| 1 | Connect quiescent current retention unit | *WH58.30-Z-1012-09A | |
| Risk of explosion from explosive gas. Risk of poisoning and caustic burns from swallowing battery electrolyte. Risk of injury from caustic burns to eyes and skin from battery electrolyte or from handling damaged lead acid batteries. | No fire, sparks, naked flames or smoking. Wear acid-protective gloves, clothing and eye protection. Pour battery electrolyte only into suitable and appropriately marked containers. | AS54.10-Z-0001-01A | |
| 2 | Disconnect ground cable of battery | AR54.10-P-0003A | |
| Notes on battery | All models. | AH54.10-P-0001-01A | |
| 3 | Remove paneling on left side in trunk | ||
| 4 | Unscrew nuts (2) and screws (3) | ||
| 5 | Carefully lift cradle (1) with control modules out of spare wheel recess | ||
| 6 | Release connectors on D2B telephone transmitter/receiver (A35/13) and disconnect | ||
| 7 | Unscrew screw (4) | ||
| 8 | Pull out D2B telephone transmitter/receiver (A35/13) | ||
| 9 | Install in the reverse order |
COMMERCIALLY AVAILABLE TOOLS
| Number | Designation |
|---|---|
| WH58.30-Z-1012-09A | Quiescent current retention unit |