Removing and installing fog lamp reflector - AR82.10-P-1830A

MODEL 129 

Fig 1: Identifying Fog Lamp Reflector (1 Of 3)

	Removing, installing
1	Remove, install lens for fog lamp		AR82.10-P-1821A
2	Open locking bracket (1) and remove housing cover (2)
3	Remove cover (3)	Turn cover counterclockwise
4	Disconnect electrical connectors (4, 5)
5	Unclip fog lamp reflector (7) from retaining lug (6)
6	Remove bulb (8)	Do not touch bulb with bare fingers, use grease-free soft rag. Observe correct installation position.
7	Install in the reverse order
8	Check fog lamp adjustment, correct		AP82.10-P-8260A