Removing and installing automatic antenna - AR82.62-P-8105A

MODEL 129 with CODE (310a) Left rear fender antenna with splitter for C network telephone (S/V 124 right rear) with CODE (328b) Left rear fender antenna with splitter for C network telephone (S124 right rear) 

short version 

Fig 1: Identifying Automatic Antenna

	Removal, installation
1	Remove tuner and amplifier		AR82.62-P-7721A
2	Disconnect ground lead from battery		AR54.10-P-0003A
3	Unscrew union nut (1)
4	Pull off cover (2)	Installation  : check gasket (3) for damage, replace, if necessary. Ensure that gasket (3) is seated properly.
5	Unscrew antenna lead (4) for radio
6.1	Unscrew antenna lead for telephone	Only on vehicles with car telephone.
7	Disconnect electrical connector (5)
8	Remove automatic antenna (M11)	Unscrew screw (6) and remove automatic antenna (M11) downward.
9	Remove spacer (7)
10	Remove antenna splitter (A28/1)
11	Install in opposite order