Control buttons, location/task - GF54.30-P-2004A

MODEL 129, 140 as of 1.6.96, 

163, 170 

The instrument cluster has two control buttons which are on the left or right next to the speedometer.

The right control button  is used to adjust the time (refer to Owner's Manual).

The left control button  is used

• to regulate the instrument illumination
• to activate the display illumination
• to reset the trip odometer display
• to operate the maintenance display (model 170 only bis 05.97)
• to operate the Active Service System ASSYST (as of 06.97)

	Purpose/function of terminal 58d, instrument display illumination	Engines 112, 113, 611 (engines with oil sensor)	GF54.30-P-3008A
	Electronic clock		GF54.30-P-3011A
	Active Service System (ASSYST)		GF00.20-P-0003-01A
	Operating instructions, resetting	Model 210 as of 01.03.97 with engines M111, OM 602, OM 604, OM 605 and OM 606	GF00.20-P-0003-01B
		As of 06/97 models 129, 140, 170, 202 except engines 112, 113, 611 (valid for engines with oil level switch)