Removal and installation of the roof frame paneling, front - ra68001400400x(0400)
Model 140
Preliminary work:
Molding at side of windshield removed (Remove and install the reveal molding at the side of the windshield ).
Ceiling light removed (REMOVAL AND INSTALLATION OF DOME LAMP WITH DELAY AND READING LAMP ).
| Interior mirror (1) | remove. |
| Screws (2) | screw out, remove mounting plate (3). |
| Screws (4) | screw out, remove sun visor (5). |
| Screws (6) | screw out, remove mount (7). |
| Panelling (8) | remove. |
|
NOTE:
On vehicles with sliding roof the bar at the front of the roof cutout must be removed upward.
|
|
| Installation | install in opposite order. |