Removing and installing TELE AID emergency call system pushbutton switch - AR82.95-P-0002A
MODEL 140.03 /04 /05 with CODE (348) TELE AID emergency call system
| Removal, installation | |||
|---|---|---|---|
| 1 | Disconnect ground lead from battery | ||
| 2 | Remove overhead control panel control module | ||
| 3 | Release in-car temperature sensor (B10/4) by turning slightly to right and pull upward | ||
| 4 | Open SOS flap (1) | ||
| 5 | Unclip TELE AID pushbutton switch (S93/3) and screw out downward | ||
| 6 | Install in opposite order |