Check setting of windshield washer system spray nozzles - AP82.35-P-8252-01BA

Fig 1: Identifying Adjusting tool (110 589 02 63 00)

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

MODEL 124

The spray jet must hit the glass surface in the marked area.

Fig 2: Identifying Spray Jet Hit Position On Glass Surface - Model 124

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

MODEL 129

The spray jet should hit the glass surface in the marked area.

Fig 3: Identifying Spray Jet Hit Position On Glass Surface - Model 129

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Model 140

The spray jet must hit the glass surface in the marked area.

Fig 4: Identifying Spray Jet Hit Position On Glass Surface - Model 140

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Model 168, 414 shown on model 168

The spray jet should hit the glass surface in the marked area.

Fig 5: Identifying Spray Jet Hit Position On Glass Surface - Model 168, 414

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

MODEL 170

The spray jet must hit the glass surface in the marked area.

Fig 6: Identifying Spray Jet Hit Position On Glass Surface - Model 170

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

MODEL 202

The spray jet should hit the glass surface in the marked area.

Fig 7: Identifying Spray Jet Hit Position On Glass Surface - Model 202

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

1 Correct windshield washer system spray nozzle settings if necessary using adjusting pin.

The spray jet must hit the windshield in the marked area.

Models 208, 210, shown on model 210

Fig 8: Identifying Spray Jet Hit Position On Glass Surface - Model 208 And 210

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.