LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 1995 >> E420 >> Repair and Diagnosis >> External Pages >> Different car >> Section 9 (Air Intake, Turbo Charging - 140 Chassis) >> Repair & Adjustments >> Removing and installing air cleaner - RA09001040015X(09-0015)

Removing and installing air cleaner - RA09001040015X(09-0015)

WARNING: This page does not describe the selected car, but rather 42 other vehicles, including the 1999 Mercedes-Benz S600, 1999 Mercedes-Benz S500, 1999 Mercedes-Benz S420, 1999 Mercedes-Benz S320, and 1999 Mercedes-Benz CL600. However, it is still accessible from the selected car via links, so may be relevant.

Operation No. of operation texts and work units or standard texts and flat rates:

09 - 0015

Fig 1: Identifying Air Cleaner Remove/Install Components
G04678473Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
Electrical connector at intake air temperature sensor (B17/2) disconnect, connect.
Air intake hose (2) at air cleaner, detach, fit on.
Nuts (arrows) unscrew, screw on.
Shaped hose (1) for crankcase ventilation, disconnect, connect.
Air cleaner (4) take off, fit on.
NOTE: When installing, ensure rubber seal (7) between air cleaner (4) and mixture control unit is in good condition and properly seated.

Replace rubber seal (7), if necessary.

Fig 2: Identifying Air Cleaner And Rubber Seal
G04678474Courtesy of MERCEDES-BENZ OF NORTH AMERICA.