Removing slide rail bolts on cylinder head - AR01.30-D-5800-04B

WARNING: This page does not describe the selected car, but rather 42 other vehicles, including the 1999 Mercedes-Benz S600, 1999 Mercedes-Benz S500, 1999 Mercedes-Benz S420, 1999 Mercedes-Benz S320, and 1999 Mercedes-Benz CL600. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Impact Extractor (116 589 20 33 00)

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Fig 2: Identifying Threaded Bolt (116 589 01 34 00)

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Fig 3: Identifying Extractor (605 589 00 33 0)

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Use threaded insert (03) and impact extractor (02) to pull out slide rail bolt (11) ; insert threaded insert (03) into the slide rail bolt (11) and pull out with the impact extractor (02).

Fig 4: Identifying Threaded Insert, Impact Extractor And Slide Rail Bolt
Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
Screw extractor (04) into slide rail bolt, turn bolt head and pull out slide rail bolt.

Fig 5: Identifying Slide Rail Bolt And Extractor
Courtesy of MERCEDES-BENZ OF NORTH AMERICA.