Removal and installation of the air collector unit and water collector - ra83001400140x(0140)
WARNING: This page does not describe the selected car, but rather 42 other vehicles, including the 1999 Mercedes-Benz S600, 1999 Mercedes-Benz S500, 1999 Mercedes-Benz S420, 1999 Mercedes-Benz S320, and 1999 Mercedes-Benz CL600. However, it is still accessible from the selected car via links, so may be relevant.
Model 140 with automatic heater control
Operation no. of operation texts and work units or standard texts and flat rates:
| Lip-type seal (arrow) | Pull out. |
| Vacuum lines on main element air flap (44) | Pull off. |
| Slacken 6 screws (3) | Lift air collector unit (2), turn thermal valve for surface heating of wiper system (7) to the left, unclip and pull out temperature sensor (B10/5). (On vehicles with automatic climate control) |
| Air intake | Cover using special tool (140 589 00 98 00). |
| Wiper system | Remove (REMOVAL AND INSTALLATION OF WIPER SYSTEM ). |
| Rubber mount | Remove, special tool 140 589 00 07 00. |
| Water collector (4) | Remove (4 screws). |
| Install | In the reverse sequence, ensuring that the two water drain hoses (10) project without any kinks into the water drainage systems. |
Special tool