Replacing drive pinion thrust washer - AR35.31-P-0530-02A
WARNING: This page does not describe the selected car, but rather 42 other vehicles, including the 1999 Mercedes-Benz S600, 1999 Mercedes-Benz S500, 1999 Mercedes-Benz S420, 1999 Mercedes-Benz S320, and 1999 Mercedes-Benz CL600. However, it is still accessible from the selected car via links, so may be relevant.
Always replace loose thrust washer (43a) to prevent clicking due to changes in load.
When pressing out the radial sealing ring, ensure that a retaining lug (arrow) has not been broken off and remove broken off lug from the center piece assembly, if necessary.