LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 1995 >> E420 >> Repair and Diagnosis >> External Pages >> Different car >> Section 35 (Rear Axle - 140 Chassis) >> Testing & Repair >> Replace radial sealing ring at drive pinion gear (with rear axle differential installed) - AR35.31-P-0530A >> Checking, removal and installation of oil thrower on drive pinion - AR35.31-P-0530-03A

Checking, removal and installation of oil thrower on drive pinion - AR35.31-P-0530-03A

WARNING: This page does not describe the selected car, but rather 42 other vehicles, including the 1999 Mercedes-Benz S600, 1999 Mercedes-Benz S500, 1999 Mercedes-Benz S420, 1999 Mercedes-Benz S320, and 1999 Mercedes-Benz CL600. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Alignment Tool (140 589 02 15 00)
G05437466Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
  1. Check oil thrower (43c) for correct fit.
  2. If it is a loose fit, replace oil the thrower and, if necessary, press onto the twelve-point collared nut using an alignment tool.
    Fig 2: Identifying Oil Thrower
    G05437467Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
scientia non olet · About LEMON Manuals